Best Laminate Roller

Best Laminate Roller for Counters, Linoleum and Large Surfaces

Disclaimer: At absolutely no cost to you, as an Amazon Associate I earn from qualifying purchases linked from this site. All content on this site is maintained and supported through such programs and your support is appreciated. Disclaimers.

A high quality laminate roller will make building counters, veneering wood and installing flooring a much easier job. And ensure a higher quality result as bubbles and adhesion issues will be minimized.

When I first started building cabinets (decades ago) we made 90% of our counters from laminate. And while it might seem like a daunting project it’s actually relatively easy. With a table saw, edge trimmer, sander, paint brush,  and a laminate j roller* you’ll be able to make a complete counter in hours. 

And for flooring jobs a larger laminate roller* will speed up the installation and help prevent future issues with bubbling and bonding.

Finally, the picture above is a 5′ laminate counter I made in late 2019 for relatives using a J-roller I’ve had a long, long time. And in all my time making counters with a J-roller I’ve only had adhesion issues with a poor performing water-based contact cement.

Best Laminate Roller

I’ve spent hours rolling laminate sheets to ensure solid adhesive connection between the laminate sheet and MDF subsurface. And while there are a lot of laminate rollers on the market, my preferred J-Roller is a simple design with a comfortable and long handle.

Powertec 71011

Editors Choice (J Roller)

J Roller for laminate counters and veneers

Features:

  • Specially designed for applying pressure on wood and plastic laminates
  • Curved handle for additional pressure
  • Features super-comfortable grips in two different styles
  • Provides optimum glue contact
  • Measures 1-1/2-Inch diameter by 3-Inch wide by 14-Inch long

Fulton Tools

Best Large Surface

Laminate roller for walls and floors

Features:

  • The Extendable Heavy Duty Segmented Roller provides excellent leverage while applying pressure to linoleum, carpets, tile, wall coverings, laminates, large veneer projects and more.
  • The heavy duty die cast leverage handle allows you lean into to apply as much pressure as needed and will take virtually all of your weight behind it.

How to Use a Laminate Roller

If you haven’t applied a laminate or veneer before you might be wondering why it’s needed. So let’s consider three ways a laminate roller ensures a tight seal on your project.

Bubbles are a laminates #1 enemy

The #1 issue with any laminate installation is a bubble. In fact, this issue is so damaging to a project that it will require (in most cases) a complete rebuild of the project.

Why’s that? Well, contact adhesive does its job very well. So well that once two pieces are connected they do not come back apart. 

Six simple steps for using a laminate roller for counters

How can a laminate roller help? Here’s how I apply laminate with one:

  1. Use clean, dust free sticks 8-12″ apart to separate your subsurface and laminate.
  2. Once the laminate is aligned, start removing sticks and firmly press the laminate down (I use my hand here).
  3. Once you have a 2-3′ surface down use the j roller to work towards your sticks (keeping a good 10-12″ away to avoid breaking the laminate).
  4. Keep repeating this process until all sticks are removed.
  5. Once all the sticks are removed start using the laminate roller from the center of the surface and roll to the edges. Do this 2-3 times over the entire surface with careful attention to the edges
  6. Trim the excess laminate with a laminate edge trimmer
  7. Re-roll the edges firmly with the laminate trimmer

Use a bright light to find bubbles fast

When you think you’re done then it’s time to inspect. 

To quality check your finished project use a bright light and close inspection of the project to find bubbles. Due to varying angles showing different flaws I like to look at the surface at all angles.

Find a bubble? Immediately start working directly over it with the roller.

Laminate Roller Buying Guide

While there’s not a lot of variation in these models there are a few considerations when shopping for a roller.

High pressure tools require a good handle

A laminate roller is used because of the narrow contact surface it creates with the laminate, adhesive and subsurface. Because of this it can generate 35 to 50 PSI to force a solid seal.

But this also requires a sturdy, comfortable handle on the laminate roller. So look for a handle with a wide, large grip that will provide comfort and encourage application of force on the largest of jobs.

  • A j-roller gets it’s name from the J shape of the handle. Wonder why a J shape? it forces the pressure over the center of the handle and thus the roller.

Looking at roller size and material

Matching the size of the roller to the job is important. And since these rollers work by applying force you’ll want to remember that a large laminate roller built for flooring applications will not work for smaller jobs.

Roller considerations:

  • A 3-4″ wide roller is just fine for counters and veneers.
  • The roller should be non-mar to prevent marking delicate surfaces
  • Rollers are typically small in diameter to provide maximum pressure (1-1/2″ is common)

J Rollers for counter laminates

A laminate counter roller is typically hand held and has one roller with a handle up to 14″ long. However, if your job requires larger counters and bigger jobs then a 2 or 3 wheeled roller with a larger handle is a good option. 

But remember that caution is required to not break off the corners of laminate as you’re rolling. And the larger the roller the greater the chance of an accidental break.

Large area laminate rollers for flooring, carpet and veeners

For flooring and large surfaces you’ll want to use a multi-wheeled roller with a large D-handle to support higher pressure over a larger contact surface. 

Considerations:

  • Look for an extendable handle with a secure lock
  • Rollers shouldn’t be larger in diameter, but they should be non-mar and roll smoothly

Frequently Asked Questions for Laminate Rollers

What is a laminate roller?

A laminate roller is used to roll laminates flat against a subsurface treated with an adhesive. Laminate rollers are commonly used in building counters (eg. Formica), rolling linoleum, adhesive tiles and veneers.

What is a J-roller?

A J-roller is a hand held laminate roller with a “J” shaped handle that allows for maximum force to be evenly applied during rolling.

How do you use a laminate roller?

A laminate roller is used immediately after a laminate or veneer is applied to the subsurface. First, start in the middle of the piece and work outwards in all directions to remove air pockets and bubbles. Then re-work the entire surface 2-3 times to ensure a tight bond.

Summary

While not the most exciting tool, a high quality laminate roller will help prevent issues with your projects. Since contact adhesives cannot be removed once two surfaces are matched there just isn’t a good alternative to a J-roller or laminate roller to remove bubbles and ensure proper adhesion.

References

Recommended Reading

Share on facebook
Share on twitter
Share on pinterest
Share on email
Share on print

Leave a Reply