Home » Workshop » Storage » The Best Lumber Racks For Small Shops

Woodworking Tips & Guides

The Best Lumber Racks For Small Shops

Updated: August 11, 2023
Storing expensive wood on the floor risks damage and clutters precious floor space. In this guide, learn the best lumber racks and how to protect your investment.
Lumber Storage Rack Store Wood
Our content is reader supported. When you buy through our links, we may earn a commission. As an Amazon Associate we earn from qualifying purchases.

The Best Lumber Racks For Small Shops

Bora PBR-001

Six Level Wood Rack

BEST: BORA 6-LEVEL RACK

Buy

IN THIS GUIDE:

  › three shelves PICK: ULTRAWALL 

  › SIX LEVEL OPTION: BORA WOOD RACK

  › VERTICAL RACK: GLOBAL INDUSTRIAL

  › PLYWOOD CART: LITTLE GIANT TRUCK

The best wood racks will keep your lumber straight, dry, and out of your way. And, for less than a dozen 2x4s, you can buy a wood storage system to protect your investment. 

Key benefits of a lumber storage system include:

  • Prevent warped wood
  • Keep wood off moisture-wicking concrete
  • Provide easy access to lumber
  • Organize their workshop
  • And, of course, protect their investment

In this guide, you can learn what lumber storage solutions are available and best for your home woodworking shop.

My Experience

While most reviews of woodworking tools and solutions are done by folks who have never turned on a saw, I’ve cut and ripped tens of thousands of board feet of lumber in my thirty years. 

And to keep that lumber flat, avoid moisture absorption, and make it accessible have used a variety of wood racks. While an industrial frame that supports hundreds of board fit is always best, a wall rack is what we use in our garage and it works great to keep the floor free of clutter. 

And expensive wood secure off the floor.

Why Storing Lumber On A Rack Is Important

Checking that Hardwood Lumber is Straight

Why Wood Warps

If you’ve spent any time around wood, you know it collects moisture and can easily warp if not cared for.

And the reason wood is warped is twofold and easy to prevent:

  • Humidity changes: Big box stores take non-kiln dried wood and bring it into a low-humidity environment. So, the wood starts to lose moisture content. And they do this so YOU don’t have to pick your lumber outside.
  • Uncovered wood: Wood that isn’t kiln-dried needs a cover on the top row. Or it will (literally) warp overnight. 
Unfortunately, the same will happen to any non-kiln-dried lumber you bring home. Or, given time, your higher-grade kiln-dried lumber will warp if exposed to continual large swings in ambient air temperature changes.
 

The science behind this is best left to scholarly articles, but the simple fact is lumber needs to be stored flat to prevent warping due to changes in the moisture content of the wood.

Preventing Wood from Warping

The process of preventing wood from warping is pretty simple if you follow these three steps:

  • Flat with support. Well, let’s get the obvious out of the way first. Because if you store wood without support, it will bow or warp.
  • Even air exposure. If moist wood is stored one side down and the other side up, the top will dry out first. And, when that happens, it will shrink – and cause the board to bow.
  • Humidity control. Wood is like a straw and sucks up moisture from the air. So, to prevent this, the best way to store lumber is in a humidity-controlled environment.
And this is where a lumber rack comes in to give you a flat storage surface. But covering it and humidity is up to you.

Best Lumber Racks For Home Woodshops

1. Bora Six Level Wood Rack

Bora Wood Rack

See the Bora Rack on Amazon  or Woodcraft

Overview

For almost all home workshops, the best option for storing wood is perhaps surprising: on the wall. 

And for most garages, this is a feasible solution as it has several advantages:

  • No floor space is required
  • Most shops can make room for 100″ of horizontal storage
  • Usually, around 250-300 pounds (or more) can be supported per rack
  • And, best of all, a wall-mounted lumber rack can purchase for around $50 for a multi-level pair.

Are you tempted to build instead? Consider the alternatives of 2×4 construction and black pipe; the build cost doesn’t save much. 

A dozen variations are on the market, but look for the highest weight capacity, most # of supports, and mounting hardware included. We like the Bora as it hits all of these criteria and is a brand name in woodworking you can trust.

Review

Pros:

  • Stores wood out of the way
  • Maximizes use of wall space
  • Minimizes value floor space
  • Easy access to wood
  • Multiple kits can be combined for longer or shorter stock

Cons:

  • Requires accurately finding studs and installing screws
  • May interfere with walking space if not properly placed

Alternatives

  • A dozen brands on the market have similar numbers of cantilever supports and weight capacity. However, look to brand names like Bora, Triton, or Rockler when buying, as they have reputation risk in their products.
  • For three-shelf configurations a popular alternative is the Ultrawall  racks. These work great for shorter ceilings or for adding middle support for shorter or longer stock.

2. Little Giant PT-2436 Plywood Truck

Plywood Cart

See the Little Giant on Amazon 

Overview

Unloading and storing plywood just isn’t fun.

Not only is it bulky, but it’s hard to access once stored if you tend to have a collection on hand. Which is where this handy cart from Little Giant will allow you to keep a wide selection of plywood goods.

And best of all, it allows you to move it to your table saw or workstation and then put it away.

Review

Pros:

  • Easily stores sheets of plywood
  • Movable around the shop
  • Large wheels move over small wood scraps

Cons:

  • Works for only short hardwood or softwood stock
  • High priced if you don’t work with sheet goods regularly

Alternatives

  • Gyptool cart offers up mobility but lacks the three vertical uprights
  • While old fashioned, plywood can’t be stored on edge on a concrete floor so a few 2×4’s placed six feet apart is the cheap solution

3. West 97220 Floating Floor Wood Rack

West Horizontal Rack

See the West Rack on Amazon  or Northern Tool

Overview

If you have floor space, a steel floating wood rack is ideal for storing a wider variety of wood and having more accessibility.

And, versus an overhead rack, this frame style will prevent working from a ladder if you have to install your wood rack higher on the wall.

When looking for a floating floor rack for wood, the following features are musts:

  • Galvanized steel to avoid rusting, especially the base. Because concrete continually “sweats,” this lumber rack will constantly contact the cement.
  • Huge weight capacity (upwards of 2000) is more common vs. the wall-mounted versions, typically limited to a few hundred pounds
  • Lastly, check the storage rungs and ensure decent horizontal width to support wider boards (10-12″ preferred)

Unfortunately, very few of these racks are on the market, and the West wood rack checks the box on all critical features.

Review

Pros:

  • 2000 pound capacity to store a high volume of wood
  • Galvanized legs
  • 5-1/2 foot high frame is accessible to woodworkers of all heights

Cons:

  • 5-foot by 3-foot base takes up a table-saw-sized footprint
  • Cost is 2-3 times a wall-based rack
  • Sometimes hard to find

Alternatives

  • We haven’t found any directly comparable, two-sided floating lumber racks.

4. Dewalt Heavy Duty Rack

Dewalt Storage Rack

See the Dewalt Rack on Amazon 

Overview

For shorter woodcuts, a heavy-duty storage rack is the best solution to keeping track of valuable wood shorts. 

With many of these on the market, the options are endless. However, this rack is a great place to start for a compact frame and any tool owner bought into Dewalt yellow.

Review

Pros:

  • Four feet tall
  • 4000-pound capacity
  • Supports optional drawer kit
  • Dewalt brand quality
  • Available in composite or mesh shelving
  • When two are used, the top and bottom shelves can be used for horizontal wood storage

Cons:

  • Isn’t suited for longer cuts
  • Diagonal support beam interferes with the use of middle shelf for pass-thru wood storage

Alternatives

  • MonsterRax is a popular option and offers models with support for 500-pounds per shelf
  • Most big box stores will have a lighter or heavy-duty rack commonly used for garage storage

5. Heavy Duty Steel Cantilever Rack

Heavy Duty Horizontal Rack

See the Heavy Duty Rack on Amazon 

Overview

If your goal is to have the absolute most amount of wood stored on a single rack then look no further than this super-heavy duty rack. 

Sporting an industrial build, massive tubing and a per-shelf capacity this type of lumber storage rack will take up floot space but also save you from installing multiple racks that won’t meet the weight capacity demands.

Review

Pros:

  • Highest capacity per shelf
  • Designed to last a lifetime
  • Adjustable arms
  • Heavy-duty steel

Cons:

  • Weight
  • Not movable
  • Highest cost

Alternatives

With many woodworking stores using similar racks, the best option to find varying configurations, heights, and weight loads is to check industrial suppliers or use them online. Given the cost of the material, shipping costs may be less than buying new ones.

6. Global Industrial Vertical Storage Wood Rack

Global Industrial Vertical Wood Rack

See the Global Industrial Rack on Amazon 

Overview

It isn’t required to store wood in a horizontal rack. In fact, if you look at big box stores and most lumber yards wood is stored vertically as it is easier to sort through. 

So why not do that at home?

Well, thanks to Global Industrial a floor-based rack that doubles as a storage rack for shorter wood, clamps or even levels is an option. 

Review

Pros:

  • Easy access to wood
  • Keeps wood off the floor
  • Doesn’t use wall space
  • Internal shelving for additional storage
  • 3000-pound weight capacity
  • Safety chain to keep wood inside the rack

Cons:

  • Requires floor space
  • Higher priced than a wall-mounted rack
  • Not movable

Alternatives

Other than building one, there aren’t many alternatives to this unique small woodworking lumber storage solution. 

Frequently Asked Questions

How do I store wood in my garage?

The best way to store wood in a garage is in a lumber rack. Using a lumber rack that is properly installed and leveled will provide the proper leveling, air circulation, and access to keep wood from warping. And ensure it’s accessible for your projects.

What is the best way to store lumber?

The best way to store lumber is in lumber racks or using bunks and stickers in a temperature-controlled environment. While a lumber rack provides easy access to surfaced wood for rough wood or high quantities, a series of (flat) bunks and properly aligned stickers will allow proper air circulation and support to prevent warping and twisting.

Is it ok to store wood in a garage?

It is OK to store wood in a temperature and humidity-controlled garage. While some wood that is not kiln-dried is easier to keep in a covered garage, wood that has been kiln-dried must be more tightly held to prevent the wood from acquiring excess moisture.

How do you store lumber so it doesn't warp?

All lumber must be stored on a flat surface, away from the sun, and in a temperature-controlled environment to prevent warping. And for wet wood, care must be taken to ensure even air exposure to the top, bottom, and sides of the lumber to prevent one surface from drying out faster than the other side. Both lumber racks and bunks with stickers are a preferred way to store lumber and protect it from warping.

How can you tell if wood is dry?

Wood is considered dry based on the type (hardwood or softwood) and the intended environment in which it will be used. For indoor projects, this is ideally around 6% for most wood and exterior, 10-12%. A moisture meter is most commonly used to tell if your wood is dry.

Summary

While the best lumber storage rack fits your shop, the excellent news is that plenty of options fit your shop and budget. Just make sure to decide on something – as the alternative is ruining wood that usually costs multiple of a storage rack.

  • About the Author
  • Latest Posts
( Woodworker )

Eric has been a professional woodworker for over thirty years and has worked in small cabinet shops making everything from kitchen cabinets to hand-made furniture. Now working from a home woodworking shop Eric is sharing his passion for woodworking, tool advice and how-to knowledge from his Minnesota-based woodshop.

Leave a Comment

Need Wood?

Subscribe for a FREE directory to 300+ hand-selected local and online hardwood retailers.

Exterior Barn Door With Galvanized Hardware

Exterior Barn Doors, Hardware And How to Build One

Building an external barn door is a great DIY project. Since your construction doesn’t need to be picture perfect this style of door can be built and used on just about any outdoor structure. In this guide learn basic construction techniques and hardware to use outdoors.

Read More »
Festool Domino DF500

Domino vs Biscuit Jointer and When To Use Each One

While biscuit joiners have been around for decades it is only recently that the Festool DOMINO has become “the” tool to own for loose tenon joinery. In this article learn the differences between a domino joiner vs biscuit joiner and what’s best for your projects.

Read More »

Disclaimer: DIY projects can be dangerous, hire a professional (link to Home Advisor) if unsure.